Slow progress and weather

It's been a while since the last update. In the last month we've had family visiting from overseas and spent about a week up in Cairns snorkeling at the barrier reef with the kids. It was nice to have a break from cold Sydney. We have also temporarily swapped houses with my parents so that the visiting family could all stay in the same house with us. Our house just couldn't handle 7 people comfortably for a month. As a result I haven't had easy access to my workshop.

But excuses aside, some rocket development has been continuing. In the last couple of weeks we built a couple of bigger test rockets to test the Mk3. Stager. We were supposed to do the final trial flights today, however, the Doonside launch has been canceled due to rain and muddy conditions making the launch site inaccessible.

We are hoping that the weather will improve tomorrow morning, so we could try the rockets at the local park at a lower pressure.

Here are the two rockets fitted with the Mk3. stagers ready for test flights. We built two just in case there is a problem with one or if it crashes and gets damaged.

______________________________

Mk3. Staging Mechanism test flights

This morning dad and I went down to the local park to continue with the staging mechanism test flights. This was the third separate set of test flights, with minor failures on the first two sets. We finally got the stager working properly today on 5 out of 5 launches so we were happy. We only flew the stager on a small booster (2.1L spliced pair) and a 1.25L second stage. The flights were done at 110psi and 120psi.

Next we'll need to test it on a larger rocket a few times, but will need to take it to Doonside for testing as the local park would be too small for it.

Here you can see the small sustainer shortly after staging. The parachute is already being deployed on the booster.

If the next set of tests proves successful, then we'll post a full tutorial on how to make it.
_______________________________________________

Doonside Launch - certification

It was a good flight weekend this week. As we are mid way through preparing the next water rocket for flight, and the launch weather looked iffy for Doonside, I decided to only bring the new pyro rocket "Waterless" (a LOC/Precision Weasel) with me as well as Paul's "Pod 2" rocket.

I had been wanting to fly the new rocket for a couple of months but didn't have a motor for it. I finally flew it on an E15-4W and it was a good flight. The delay seemed on the long side and the parachute opened a little late, but it was a good recovery and the rocket landed without damage. The flight was my mid-power certification flight so I was happy. I can buy up to G motors now. :)

We have had a couple of small water rocket launches at our local park since the last main website update as we are testing a staging mechanism, but have had a couple of failures, so after a couple of modifications we are ready to try it again. If the design proves successful, I'll post full construction details.
______________________________

Williams Westernationals 2010 Highights video

I've finally finished editing the video of the trip to Perth from a couple of weeks ago. I've also used a number of clips shot by Shane Miles as he had some great detailed shots of the high power launches.

Here are the highlights from the two HPR launch days:



(It's best to view the video at 480p or HD in YouTube)

_____________________________

Parachute Cam and Polaron G1

This weekend we a had a really good launch day. The weather was perfect and the rockets behaved themselves. During some unrelated test flights we took the opportunity to mount one of the tiny MD-80 cameras in the center of the parachute looking down.

Although quite a bit shaky, the video did give us a different perspective on the rocket in flight. The full launch report including photos and a highlights video is available here:

http://www.aircommandrockets.com/day93.htm

The update also includes the test flights of the fiberglass Polaron G1 rocket. On the second flight we flew it at 230psi to 751' (229m) which was our highest (by 5 meters) single stage flight.

_________________________________________

Williams "Wildfire" Westernationals 2010

This weekend I took a break from water rocket development and headed over to Perth to attend the Williams "Wildfire" Westernationals 2010.

What an awesome experience it was to see a lot of high power rockets go up. It was great to finally meet a lot of the people in person from the Australian Rocketry forum as well. They are great bunch of guys too. A big thank you goes to Scoop and Mel and all those who helped organise and cater the event.

Congratulations to all those who did their L1, L2 and L3 certifications.

Here are some pictures from the event:

http://ausrocketry.com/forum/viewtopic.php?f=37&t=2189


Very strong the dark side is ......

_________________________________________

Water Rocket Labs

Well finally after many delays and procrastinations, I've uploaded the website extension. Originally it was going to be a separate entity, but I have decided to just make it a sub-section of the new site. This also makes it logistically easier to administer.

"Water Rocket Labs" was developed to help water rocketeers make better decisions about building their rockets. The site provides data and analysis about various aspects of water rocketry including materials and their performance.

The focus is not only on the data itself but also on the procedures and test equipment used to obtain the data. This allows others to follow the same procedures and compare their results against the data presented at the labs. The data is cross linked to the experiments, test procedures and test equipment used to obtain them.

Some of the experiments included in the site have been published before on our main site, however, there is a range of experiments we had not published before. With the previously published results I have trimmed them down only to the relevant information.

We will continue to update our regular site with launch reports, articles, construction details etc, but all new science or engineering results will go into the Labs section.

There are around 80 pages of information in the extension. Some sections are still sparsely populated, but we now have the framework to add more data as we obtain it.

Here it is: http://www.aircommandrockets.com/labs/index.htm

We invite people to submit their data to the Labs that will hopefully help others make better decisions about building water rockets.

________________________________________

Water Rocket Launcher Article

Over the last month I've slowly been putting together an article to help explain the range of different launcher design options rocketeers have when building their own.

The article is available here:

http://www.aircommandrockets.com/rocket_launcher.htm

Along similar lines as the recovery guide I've tried to include lots of links to examples showing how the different components have been implemented by the water rocket community.
_________________________________

Moving Main Website

I've been putting it off for long enough, so this weekend I have started relocating our main website. Up until now we have been hosting it on a free 50Mb partition we get with our ISP. The problem was that we were running out of room, well for quite a while now actually, so a lot of the actual images had to be hosted elsewhere.

To expand the 50Mb partition just wasn't possible with this ISP without signing up for actual 'hosting' where they wanted another $50 setup fee and then an extra $110/year for 100Mb of space. That was just ridiculous. So we have gone with an alternative hosting company where we only pay $70/year for 10Gb of space.

The usual domain: http://home.people.net.au/~aircommand/ will be replaced with http://www.AirCommandRockets.com/ . We've had the AirCommandRockets.com domain registered for quite a while but it was getting forwarded to the people telecom site.

I will be replacing the people telecom pages soon with forwarding pages to the new site, and eventually remove them completely. If you have links with http://home.people.net.au/~aircommand they can simply be replaced with http://www.AirCommandRockets.com as all the underlying website structure remains the same.

The AirCommandRockets.com site is now live but there may be a number of disruptions over the next week or so.

The extra space will allow us to upload the website extension we have been working on and have had to put on hold until we had more space. We'll also now be able to add extra features to the site, that weren't possible before.



________________________________

Testing beyond 300psi and old videos

This week dad set up new test equipment for us to use so that we can test beyond 300psi. Which is what our high pressure test panel went up to. We now have test capability up to around 800psi, though we would need to replace the air hose with a high pressure one for the upper range. We mostly wanted to see at what pressure the fiberglass bottles will fail so that we know what the safe launch pressure is.

We now have a nice giant pressure gauge which makes it easy to see.... even by those at the back of the classroom. :)

As we look to upgrade Acceleron V to higher pressures we have to check the individual components to see if they will be up to the job. Here dad was testing the thin plastic tubing we are using for the sustainer air supply line. It goes between the baseplate release mechanism and the staging mechanism with a non-return valve along the way. It says on the side it is rated to 50psi operational pressure. We have been pressurising it to 130psi (having previously tested it to 180psi) With our rocket pressures now nearing 250psi, this was always likely to be a weak point ......

Here it is still holding around 630psi! ....If you notice in the background, the whole experiment is now covered with a pile of concrete pavers.

Old Videos

About a week ago we noticed that some of the older videos on our website weren't playing. I'm not sure how long it's been like that. These mostly covered flight days 1 to 55. It turns out MySpace changed how videos are embedded and that broke all the existing embeded URLs. *sheesh*

So tonight I've gone back and fixed up all the embedding code to reflect how MySpace wants to do it .... until next time. We've stopped using MySpace around day 55 for our videos and now almost exclusively upload to YouTube.

I must go back and check over other broken links on the website as some things have disappeared. I try to fix them as I come across them, but there are always new ones. If people come across broken links please let me know and I'll try to fix them if possible.
______________________________

Fiberglass rocket launch report

I've updated our main website with the latest launch report on the flights of one of the fiberglass rockets. The update is available here:

http://www.AirCommandRockets.com/day92.htm

It includes photos and a highlights video from the day. The small rocket that was launched at 245psi managed to get up to 744' (226m). We thought that was pretty reasonable considering it was slightly bent, used a small 9mm nozzle, and no launch tube. .... right... can't sit around here typing .... must get back to the workshop :) ....

___________________________________

Great Photos from Acceleron V flights

Andrew Eltobaji from NSWRA took some great photos of our 2 stage rocket from a month ago. He definitely has great skill in catching fast moving rockets in action.

See some of his other pyro rocket photos here: http://s278.photobucket.com/albums/kk99/elta100/ and click on the NSWRA folders on the left side.

Here are some of his photos from the day. I have included them here in their almost full resolution. (Blogger will not let me upload the full resolution.)  Be sure to click on the photos so you can zoom in and get a good look at the detail. I wish I could take good photos like that!



Flight #2

I'm actually not that close to the rocket ... telephoto lenses are great!

It looks like the red booster is a little late in starting its air pulse.

Blue food colouring in the water is a great way to contrast against the white clouds

Secondary (backup) parachute is being deployed.

Coming in for a gentle landing

Flight #1

Good laminar flow from all of the nozzles during the booster's water phase.

Without the blue colouring, things are less messy on the ground.

Rocket is suspended sideways to cause extra drag and land more gently.

________________________________________

Fiberglass rocket flights

This week has been a very busy week in trying to get a couple of fiberglass rockets ready for today's Doonside launch. We ended up flying the smaller one four times, with some failures as well as some very good and promising results. There was a very strong wind at the launch site and so we decided not to launch the bigger rocket. We ended up launching the last rocket at 245psi - our highest launch pressure to date.

I'm in the process of putting together a launch day report again, which should hopefully be available in the next couple of days.
__________________________________

Fiberglass pressure test results

We have now tested a number of glass reinforced spliced-pairs of bottles. The results so far look quite promising in improving the performance of our rockets. The extra weight of the reinforcing requires an extra 30psi to compensate, but the much higher launch pressure should raise the altitude considerably.

Next we need to assemble these into a proper rocket and pressure test it for leaks.

The full update including performance simulations is available here:
http://www.AirCommandRockets.com/day91.htm

The update also includes a progress build on our first MPR pyro rocket.
____________________________

Fiberglassing pressure vessels

Yesterday we had our first go at fiber-glassing some bottles in order to be able to safely increase the launch pressure. We wrapped one spliced pair with a single layer of glass and the other with a double wrap.

The bottle on the left has a single layer and the one on the right is double layer. The bottles are only spliced with Sikaflex 11FC glue for an air tight seal. We are going to give the splices a week to fully cure before hydro testing them to destruction. I'll post the results of these tests when they are available.

__________________________

Acceleron V flights Update and Video

I have finished doing the launch report for this weekend's 2 stage flights. The update is available here:

http://www.AirCommandRockets.com/day90.htm

The update includes photos, altimeter plots, flight event time lines as well as a highlights video.

Here is a view of the Doonside launch field.

_________________________________

New personal records

We had a great launch day today at Doonside. We finally got the Acceleron V rocket with Axion IVb sustainer flying properly. ...ie. upwards and also not into pieces. We launched the pair twice on the day at 120 psi.

 Acceleron V taking off on its second flight.

The sustainer reached 787' (239m) on the first flight and 810' (246m) on the second flight. Our previous highest altitude was 637' (194m). We also set our longest water rocket flight time at 1:00 min.We were hoping to break the 200m mark with this flight, and got the 800' mark as well. We are going to have a good look at the data from these flights and see where we can make further improvements.

I will be putting together a main website update over the next few days with more details, video and photos from day.

_______________________________

Comparing real world data to simulator data

We've uploaded the flight day 89 launch report to our main website here:

http://www.AirCommandRockets.com/day89.htm

The update includes pictures and video from the launch day as well as a comparison of acceleration data from a couple of flights and 3 water rocket simulators.

__________________________________________________

Doonside launch

Over the past couple of weeks we have been continuing to build rockets, although a little slower due to other non-rocket related commitments.

This weekend we flew a couple of different experiments at Doonside. We wanted to flight qualify the Acceleron V sustainer testing the jet foaming tornado coupling insert in the process.

We also flew three test flights with Craig's pyro rocket flight computer. It didn't control deployment but was along for the ride to gather flight data. The data from these flights and simulation results for comparison will be published in the next main site update.

I'm still in the process of writing up the full launch report which will take at least a couple more days.

________________________________________

Dual Deployment

On Saturday we had a good launch day at Doonside. We tested a dual deploy mechanism on a couple of smaller rockets, and even managed to explode one on the pad. We also test flew the MD-80 clone camera on 3 of the flights.

The full update is available here:
http://www.AirCommandRockets.com/day88.htm

The update includes, videos of both water and pyro action from the day. There are also a couple of updates on some of the other things we have been working on.

Photo: Andrew E.

_______________________________________